XRE90 Face Mills


XRE90 Series Diamond End Mills

Geometry Specifications:
Axial: Positive Radial: Negative

XR90 End Mills are a Multi-purpose positive/negative geometry cutter that optimizes horsepower utilization. This allows you to get the most from your low horsepower machines. Also, this cutter is designed to perform at accelerated spindle speeds. To extend its application range (value), the pockets are designed to accept either the round or the octagon inserts. Non-rhythmic insert spacing counters harmonic vibration (chatter). Inserts are available in PCD.





 XR90 End Mill - Dimensional Specifications
Product Number D OD S L A DOC Insert Teeth
XRE1.50PN90SE5R.75 1.50 1.50 0.75 4.50 0° .540 WSECH-534R 2
XRE1.50PN90SE5R1.00 1.50 1.50 1.00 4.50 0° .540 WSECH-534R 2
XRE2.00PN90SE5R1.25 2.00 2.00 1.25 4.50 0° .540 WSECH-534R 3

Milling Cutter Nomenclature

 Parts
Insert I.C. & Thickness Insert Number Torx Screw Lock Screw Wrench
 
.625 x .187 WSECH-534R 3605-0001-0023
 1557-TX20
Use Checkbox Selections for Multi-Select feature to work


Insert Nomenclature

Starting Machining Parameters
Material SFPM FPT Primary Secondary
PH Type Stainless Steel 17-4, 15-5, 13-8 500-1200 .003-.015 WSECH-534-10F GR 606jRm WSECH-534W520 GR LTC-14
Austenitic Stainless Steel 302, 304, 316 400-1350 .003-.015 WSECH-534-10F GR 586XRm WSECH-534W520 GR LTC-10
Titanium Alloy 3A1-2.5V, 5A16n-2Zr-1mo, 6A14V 120-325 .003-.015 WSECH-534-10F GR 586XRm WSECH-534-10F GR LTC-10
Carbon Steel 1018, 1020, 1215 600-1500 .005-.020 WSECH-534W520 GR 606jRm WSECH-534W520 GR LTC-14
Alloyed Steel 4130, 4340, 6150 400-1200 .005-.020 WSECH-534W520 GR 606jRm WSECH-534W520 GR LTC-14
Tool Steel 350-1000 .005-.020 WSECH-534W520 GR 606jRm WSECH-534W520 GR LTC-14
Nickel Based Material K-Monel, Inconel 625, A286 100-50 .003-.015 WSECH-534-10F GR 586XRm WSECH-534-10F GR LTC-10
Aluminum 2024, 6061, 7072 900-4000 .003-.015 WSECH-534-10F GR LTC-10 WSECH-534-10F GR LTC-10