293 Series Face Mills
Geometry Specifications:
Axial: Positive Radial: Negative
 
|
|
| 293 Series Face Mills Geometry Specifications: Axial: Positive Radial: Negative |
|
|
LOVEJOY Tool Company has a new ZAP or Z Axis Plunge Mill. 293 Series, which is intended to be used in applications where there are increased metal removal rates and when tool overhang ratios are exceeded. Tool deflection is decreased when plunging as the cutting forces are directed back into the spindle. This new machining system comes in sizes ranging from 2.00" to 6.00" in diameter. |
| Product Number | D | A | B | H | DOC | Insert | Teeth | Wrench |
| 293F0250ACP3-075R | 2.50 | 0° | 0.75 | 2.00 | 0.56 | CPEH-32.63-4L___ CPEH-3263-4L___ |
5 | 1557-TX15 |
| 293F0300ACP3-100R | 3.00 | 0° | 1.00 | 2.00 | 0.56 | CPEH-32.63-4L___ CPEH-3263-4L___ |
6 | 1557-TX15 |
| 293F0400ACP3-125R | 4.00 | 0° | 1.25 | 2.00 | 0.56 | CPEH-32.63-4L___ CPEH-3263-4L___ |
6 | 1557-TX15 |
| 293F0500ACP3-150R | 5.00 | 0° | 1.50 | 2.00 | 0.56 | CPEH-32.63-4L___ CPEH-3263-4L___ |
8 | 1557-TX15 |
| 293F0600ACP3-200R | 6.00 | 0° | 2.00 | 2.00 | 0.56 | CPEH-32.63-4L___ CPEH-3263-4L___ |
9 | 1557-TX15 |
| Milling Cutter Nomenclature |
| Insert Nomenclature |
| *Left hand inserts are used in Right hand cutters. |
| Series | Insert Type | Screw Designation | Wrench | Torque (Inch lbs.) |
| "ZAP" | CPEH-32.63-4L__ CPEH-3263-4L__ |
3605-0001-0033 | 1557-TX15 | 25 |
| Material | SFPM | FPT | Primary | Secondary |
| Gray Cast Iron, Class 30 | 200-500 | .002-.008 | 586XRm | LTC-10 |
| Tool Steel, D2 | 250-350 | .002-.008 | LT-5565 | LTC-14 |
| Medium Alloy Steel | 300-700 | .002-.008 | LT-5565 | LTC-14 |
| Tool Steel, P20 | 300-700 | .002-.008 | LT-5565 | LTC-14 |
| Soft Alloy Steel | 400-800 | .002-.008 | 606jRm | LTC-14 |
| Stainless Steel, 17-4PH, 15-5PH | 300-700 | .002-.008 | LT-5565 | LTC-14 |
| Stainless Steel, 304, 316 | 200-500 | .002-.008 | 586XRm | LTC-10 |