190 Series Face Mills NEW ALUMINUM BODY, Light Weight Cutters use PCD tipped inserts mounted in insert cartridges, which allows for quicker setups Cutter bodies are made of high strength aluminum and coated for greater surface hardness Used in machining non-ferrous metals and abrasive non-metallics

190 Series Face Mills

Geometry Specifications:
Axial: 7° Positive Radial: Positive
Shoulder: 90°

190 Series NEW ALUMINUM BODY, Light Weight Cutters use PCD tipped inserts mounted in insert cartridges, which allows for quicker setups. Cutter bodies are made of high strength aluminum and coated for greater surface hardness. Used in machining non-ferrous metals and abrasive non-metallics.

**190 Face Mill - Dimensional Specifications**
Product Number	D O.S.C.	OD	B	H	A +0 -1/2°	Max DOC "B" Tip	Insert	# of Teeth
190F0250AFP4-075R	2.50	2.500	0.750	2.375	90°	.225	WFPCW-436R	4
190F0300AFP4-100R	3.00	3.000	1.000	2.375	90°	.225	WFPCW-436R	5
190F0400AFP4-125R	4.00	4.000	1.250	2.375	90°	.225	WFPCW-436R	7
190F0500AFP4-150R	5.00	5.000	1.500	2.375	90°	.225	WFPCW-436R	8
190F0600AFP4-150R	6.00	6.000	1.500	2.375	90°	.225	WFPCW-436R	10
190F0800AFP4-UNVR	8.00	8.000	2.500	2.375	90°	.225	WFPCW-436R	10
190F1000AFP4-UNVR	10.00	10.000	2.500	2.375	90°	.225	WFPCW-436R	12

Milling Cutter Nomenclature

**Parts**
Insert IC & Thickness	Insert Number	Insert Cartridge	Cartridge Adjusting Screw	SHCS for Insert Cartridge	Insert Screw	Lock Screw Wrench

.500 x .188	WFPCW-43_R	3502-0914-0017	3602-0002-0004	SHCS 1/4-28 x 5/8	3605-0001-0046	1557-TX15

Use Checkbox Selections for Multi-Select feature to work

Insert Nomenclature

**Starting Machining Parameters**
Material	SFPM	FPT	Primary	Secondary
Silicon Aluminum 19%	2000-4000	.003-.025	WFPCW-43_R	WFPCW-43_R
Silicon Aluminum 12%	2000-4000	.003-.025	WFPCW-43_R	WFPCW-43_R
Silicon Aluminum 7%	3000-6000	.003-.025	WFPCW-43_R	WFPCW-43_R

Click Here for Lovejoy's 190 Series Tooling Sucess Story