255 End Mills 255 Series End Mills

Geometry Specifications:
Axial: Positive Radial: Negative

The 255 Series have increased face clearance from standard XR series for increased ramp capability, and they have a multi-purpose positive/negative geometry which optimizes horsepower for full utilization. The diameter is measured over the maximum diameter for profile mold programming.

 





255 End Mill - Dimensional Specifications - click for Kits
Product Number D OD B L R DOC Insert Teeth Wrench
255E0200ARE6-W075R 2.00 2.00 0.75 4.25 .375 .375 RECH-63___ 3 1557-TX20

Milling Cutter Nomenclature

 Parts
Insert IC & Thickness Insert Number Insert Number Screw Wrench
 
.750 x .188 RECH-63-10F RECH-63W520 3605-0001-0023
 1557-TX20
Use Checkbox Selections for Multi-Select feature to work


Insert Nomenclature

 Starting Machining Parameters
Material SFPM FPT Primary Secondary
PH Type Stainless Steel 17-4, 15-5, 13-8 500-1200 .003-.015 RECH-63-10F GR 606jRm RECH-63W520 GR LTC-14
Austenitic Stainless Steel 302, 304, 316 400-1350 .003-.015 RECH-63-10F GR 586XRm RECH-63W520 GR LTC-10
Titanium Alloy 3A1-2.5V, 5A16Sn-2Zr-1mo, 6A14V 120-325 .003-.015 RECH-63-10F GR 586XRm RECH-63-10F GR LTC-10
Carbon Steel 1018, 1020, 1215 600-1500 .005-.020 RECH-63W520 GR 606jRm RECH-63W520 GR LTC-14
Alloyed Steel 4130, 4340, 6150 400-1200 .005-.020 RECH-63W520 GR 606jRm RECH-63W520 GR LTC-14
Tool Steel 350-1000 .005-.020 RECH-63W520 GR 606jRm RECH-63W520 GR LTC-14
Nickel Based K-Monel, Inconel 625, A286 100-650 .003-.015 RECH-63-10F GR 586XRm RECH-63W520 GR LTC-10
Aluminum 2024, 6061, 7072 900-4000 .003-.015 RECH-63-10F GR LTC-10 RECH-63-10F GR LTC-10