222 End Mills222 Series End Mills

Geometry Specifications:
Axial: 7° Positive    Radial: Negative   Lead: 15°

222 Series End Mills are ideal for small and light duty machines in general purpose applications. Simple screw on insert design for a minimum of hardware. Conventional rakes designed to machine a wide range of materials. 15° lead to minimize break out and decrease cutting forces.

 
Promotional 220 Series Kits Include:

  • 1 Cutter listed w/Kit
  • 10 Inserts w/grade choice
  • 7 Insert Screws
  • 1 Torx Wrench
  • 1 Anti-Seize Tube
  • 1 Lovejoy Towel
 222 Series End Mill - Dimensional Specifications - click for Kits
Product Number D OD S L A DOC Teeth
222E0100ASP3-W075R 1.000 1.17 0.750 3.00 15° 0.156 2
222E0125ASP3-W075R 1.250 1.43 0.750 3.50 15° 0.156 3
222E0125ASP3-W100R 1.250 1.43 1.000 3.50 15° 0.156 3
222E0150ASP3-W075R 1.500 1.67 0.750 3.50 15° 0.156 4
222E0150ASP3-W125R 1.500 1.67 1.250 3.50 15° 0.156 4

Milling Cutter Nomenclature

 Parts
Insert I.C. & Thickness Insert Number Insert Screw Insert Screw Wrench
 
.375 x .156 SPEX-32.52 3605-0001-0021
 1557-TX10
Use Checkbox Selections for Multi-Select feature to work


Insert Nomenclature

Starting Machining Parameters
Material SFPM FPT Primary Secondary
Cast Iron 300-600 .004-.012 SPEX-32.52F GR 586XRm SPEX-32.52 GR 586XRm
Stainless Steel 300 250-500 .004-.012 SPEX-32.52 GR 586XRm SPEX-32.52 GR LTC-10
Soft to Mild Steel 300-500 .004-.012 SPEX-32.52B GR 606jRm SPEX-32.52B GR LT-40
Alloy Steel 300-700 .008-.012 SPEX-32.52FW515 GR LT-5565 SPEX-32.52B GR 606jRm
Aluminum 1000 and Up .004-.012 SPEX-32.52 GR 586XRm SPEX-32.52 GR LTC-10